Support

Answers to the common questions are below. If yours is not here, or something is not working, email us.

Contact. info@quantumencoding.io

It helps to tell us your device model, its iOS or iPadOS version, the app version (Settings › About), and what you were doing when the problem appeared. A screenshot helps too. Please do not send a client's survey unless we ask for it.

Getting started

Do I need an account?

No. There is no sign-in and no SurveyorsMate server. Open the app, accept the terms, and start.

Which devices does it work on?

iPhone and iPad running iOS 26 or iPadOS 26, or later. LiDAR scanning needs an iPhone Pro or iPad Pro, because those are the models with the LiDAR scanner. The plan editor, heat loss and exports work on any supported device.

Can I try it without a LiDAR device, or before my first job?

Yes. Go to Settings › Demo data › Load sample survey. It adds a seven-room survey that you can edit, assemble into a floor, work out heat loss on and export, without scanning anything. Remove in the same place takes out only the sample rooms and their two jobs; anything you scanned or typed yourself is left alone.

Where can I get the app?

SurveyorsMate is coming to the App Store. It is not available to download yet.

Scanning and measuring

How accurate is a scan?

Treat a scan as a good first draft, not a finished survey. It comes from the device's camera and LiDAR sensor, and lighting, surfaces, movement and the device's condition all affect it. Take a tape or a laser to the things that have to be right, such as the longest wall, the ceiling height and any awkward return, and correct the drawing where it disagrees. Always verify a measurement before relying on it for a quotation, contract or construction work.

How do I check a plan against my own measurements?

In a guided survey, the measure step records your readings for the room and the check step sets each one against the wall drawn nearest its length, or against the ceiling. A reading within 30 mm of the drawing counts as agreeing. Where one disagrees, the app names the wall and offers to fix it.

How do I pair a laser meter?

SurveyorsMate works with a Leica DISTO laser meter over Bluetooth. Go to Settings › Laser measure › Pair a DISTO and press the laser's Bluetooth button to wake it. The app asks for Bluetooth permission the first time. Once connected, shots land on the plan while you are entering a room's walls. Forget disconnects it.

The app drew one big room where there are two. What do I do?

Go back to the scan and use Split into levels & rooms, which re-reads the walls and separates them. The check step in a guided survey explains this and the other fixes, and its reference lists what every editor control does.

Why are some scan modes marked Beta?

Whole-floor and outside scanning are newer than single-room scanning and are labelled Beta in the app. Check their results with extra care.

Heat loss

What does the heat-loss figure depend on?

The plan's rooms, the fabric you set for each element, the external design temperature and the flow and return temperatures you choose. The external design temperature sets the whole calculation, because every room's temperature difference is measured from it.

Can I use the figures for an MCS or building-regulations submission?

No. The calculations are on-site estimating aids. The library U-values are indicative figures for a construction type and age, not measurements of the building. A filing must be produced with the certified design tool your scheme requires.

Your surveys, backup and export

Where are my surveys stored?

On your device, in the app's own storage. SurveyorsMate keeps nothing in iCloud itself. Deleting the app deletes everything you have not exported, uploaded or backed up.

How do I back up, or move to a new device?

Go to Settings › Backup › Export backup. You get one file with every job, scan, photo, walkthrough, site log and measurement on the device. Save it to Files or AirDrop it. On the other device, use Restore in the same place and pick the file.

Restoring replaces every job on that device with the backup's, so export a backup of the device first if it already holds work. A company-server sign-in is not in the backup file: connect and sign in again on the new device.

What can I export?

Floor plans and drawing sets as PDF, plans as DXF, an IFC model, a heat-loss report as PDF, and 3D models of a scan. An outside scan exports as its site plan.

Company server

What is the company server setting?

It is for surveyors whose company runs its own survey server. It is off by default, and most people never need it. Quantum Encoding Ltd does not provide a server for the app.

How do I connect?

Go to Settings › Company server, enter the address your company gave you, and sign in on your company's own sign-in page in the browser. The app shows a short code to confirm there. Your password never passes through the app. The address must be an HTTPS one.

What gets uploaded, and when?

Only the job you tap Upload on, and only when you tap it. The upload holds the job's details, its room plans and a PDF of the drawings. 3D scans, photos, videos and the site log stay on the device. The privacy policy lists the details.

How do I disconnect?

Disconnect in Settings › Company server. Jobs you already uploaded stay on the server; ask whoever runs it if you need one removed.

The upload failed or I cannot sign in.

The app shows the server's message. Sign-in and uploads are handled by your company's server, so your company's IT contact is the right first call. If the app itself is misbehaving, email us.

Privacy and permissions

Does the app send my data anywhere?

Not unless you export, share or upload it. Address search for a job goes through Apple's MapKit service while you type an address or use your current location. The privacy policy sets this out in full.

Why does the app ask for these permissions?

Each is asked for when you first use the feature, and you can change any of them in the Settings app on your device.

Where can I read the terms I accepted?

In the app at Settings › Terms & privacy, and on this site: terms of service and privacy policy.

Contact

info@quantumencoding.io
Quantum Encoding Ltd, 33 Oxford Street, Coalville, LE67 3GS.